Treexmas.pngLogxmas.pngSanta small.pngTreexmas.pngSanta small.pngTreexmas.pngSanta small.pngTreexmas.png [ [ [ bloggin space w i k i ] ] ]Santa small.pngTreexmas.pngSanta small.pngTreexmas.pngSanta small.pngTreexmas.pngLogxmas.pngTreexmas.png

Putting In A Curb Stop

From blogginpedia
Revision as of 00:49, 29 September 2022 by Weishaupt (talk | contribs)
Jump to navigation Jump to search
They come in many sizes

So you have Installed A Shut Off Valve On A Water Main. What do you do next? Do you just bury it? Do you just leave a hole there so that some kid can fall into it and break his arm?

NO.

If you bury it, you can't shut off the valve if you need to, and that was the whole point of installing the thing, right? If you leave the hole open, it will not become a hazard by injuring a child, but it could fill up with water and make a huge mess. So just what do you do???

You spend a few hours Putting in a Curb Stop.

WTF is a Curb Stop?

You ever walk down the street and see one of these things?

The top and cap of a Curb Stop

What you see in that picture is the top of a cast iron pipe that is oriented straight down. It leads to a bell housing that covers the top of a water shut off valve. Usually, these shut off valves turn with a key. In between the top and the bell housing is a cast iron "stove pipe." This stove pipe can be any length, but is usually just a few feet. The whole mechanism is designed to provide a protected access to the valve so that the water main can be shut off and turned on.

To prevent hooligans from messing with the valve, there is usually a cast iron cap that fits into the top of the curb stop. Some of them will have a five sided bolt that will prevent access to normies who don't have a five sided wrench to open the cap.

What A Curb Stop Is Really

Details of a curb stop

IRL Shit

You got your average valve here...

Curb stop4.jpg

And then you put your average curb stop assembly on top of it...

Curb stop2.jpg

Finally, you start to bury the thing so nobody can screw around with it.

Curb stop1.jpg

I forgot to take a picture of the end result, but do you really need it? I drew that MSPaint image up there that pretty much explains the whole process. I may go out there and take a picture at some later date, but don't hold your breath.

Notes

I understand why they are called a "curb stop," because usually they are installed near a home's curb and are meant to stop water so that repairs or installations can be done. However, these things can be installed anywhere, so really they should be called an Anywhere Stop.

Beer22.png
Putting In A Curb Stop is a part of a series on Manly Shit

SharkBite | Plugging A Tire | Do It Yourself! | Frost Heave | Terramite T5C | Shit, Shower, Shave | A Stick | Analog Water Meter | Testing A Drinking Water System | Husqyvarny | Putting A Tire On A Rim | Repairing A Water Service | A Pocketknife | Valve Snake | Bobcat and Bush Hog | Andre | Mr. Mitchell | DIY - Coffin | ZERK | Installing A Shut Off Valve On A Water Main | Stupid Baby Bunny | Putting In A Curb Stop | What To Do With An Old Mobile Home | Shed Happens | Skid Donuts | The Greatest NFL Team Of All Time | So, Your Hydraulic Pump Died On Your Dump Bed? | Sully | Penis Bone | Jump Start Your Truck With A Cordless Battery | Audrey Elizabeth Hale | Notre Dame | 710 | Green Leaf Volatiles | Perfect | Cyrus Nock | HVAC | Labor Day Weekend | Alone | Cedar | One Tough House | Heat Tape | John Cena | Mother's Day | Sweeping T | PVC Slide Repair Coupling