[ [ [ bloggin space w i k i ] ] ]Difference between revisions of "Putting In A Curb Stop"
| Line 1: | Line 1: | ||
[[File:curb_stop6.jpg|thumb|right|120px|They come in many sizes]] | [[File:curb_stop6.jpg|thumb|right|120px|They come in many sizes]] | ||
So you have [[Installing A Shut Off Valve On A Water Main|Installed A Shut Off Valve On A Water Main.]] What do you do next? Do you just bury it? Do you just leave a hole there so that some kid can fall into it and break his arm? | So you have [[Installing A Shut Off Valve On A Water Main|Installed A Shut Off Valve On A Water Main.]] What do you do next? Do you just bury it? Do you just leave a hole there so that some kid can fall into it and break his arm? | ||
'''NO.''' | '''NO.''' | ||
Revision as of 00:38, 29 September 2022
So you have Installed A Shut Off Valve On A Water Main. What do you do next? Do you just bury it? Do you just leave a hole there so that some kid can fall into it and break his arm?
NO.
If you bury it, you can't shut off the valve if you need to, and that was the whole point of installing the thing, right? If you leave the hole open, it will not become a hazard by injuring a child, but it could fill up with water and make a huge mess. So just what do you do???
You spend a few hours Putting in a Curb Stop.
WTF is a Curb Stop?
You ever walk down the street and see one of these things?
What you see in that picture is the top of a cast iron pipe that is oriented straight down. It leads to a bell housing that covers the top of a water shut off valve. Usually, these shut off valves turn with a key. In between the top and the bell housing is a cast iron "stove pipe." This stove pipe can be any length, but is usually just a few feet. The whole mechanism is designed to provide a protected access to the valve so that the water main can be shut off and turned on.
To prevent hooligans from messing with the valve, there is usually a cast iron cap that fits into the top of the curb stop. Some of them will have a five sided bolt that will prevent access to normies who don't have a five sided wrench to open the cap.
What A Curb Stop Is Really
IRL Shit
You got your average valve here...
And then you put your average curb stop assembly on top of it...
Finally, you start to bury the thing so nobody can screw around with it.
I forgot to take a picture of the end result, but do you really need it? I drew that MSPaint image up there that pretty much explains the whole process. I may go out there and take a picture at some later date, but don't hold your breath.
SharkBite | Plugging A Tire | Do It Yourself! | Frost Heave | Terramite T5C | Shit, Shower, Shave | A Stick | Analog Water Meter | Testing A Drinking Water System | Husqyvarny | Putting A Tire On A Rim | Repairing A Water Service | A Pocketknife | Valve Snake | Bobcat and Bush Hog | Andre | Mr. Mitchell | DIY - Coffin | ZERK | Installing A Shut Off Valve On A Water Main | Stupid Baby Bunny | Putting In A Curb Stop | What To Do With An Old Mobile Home | Shed Happens | Skid Donuts | The Greatest NFL Team Of All Time | So, Your Hydraulic Pump Died On Your Dump Bed? | Sully | Penis Bone | Jump Start Your Truck With A Cordless Battery | Audrey Elizabeth Hale | Notre Dame | 710 | Green Leaf Volatiles | Perfect | Cyrus Nock | HVAC | Labor Day Weekend | Alone | Cedar | One Tough House | Heat Tape | John Cena | Mother's Day | Sweeping T | PVC Slide Repair Coupling